Filtration Device $940

Laser Cutter Engraver Filtration Machine


3D Laser Engraving Accessory - For Chinese Laser Machinery Owners by Mahoney

3D Laser Engraving Chinese Laser Engraver/Cutter CO2 laser machine system

  • Add 3D laser engraving to your laser machine to add capability.
  • Fits any Chinese Laser Machine. Fits Weike, Hurricane Lasers, Boss Laser, Morntech, Beyond Laser, Glory Laser, Golden Laser, and many more.
  • New capability, new functionality. Get more out of your machine! Includes common software with instructions on how to execute 3D engraving.
  • Includes ability to take images and separate out each layer for engraving. Maximum 250 layers for highest detail. Includes example parts showing 3D laser engraving.




Rotary (Surface Type) Accessory - Fits Chinese Laser Engravers/Cutters by Mahoney.  $795

High quality Rotary Device with removable clamp for open mouth cylinders

  • Add rotary laser processing capability to your laser engraver with the Mahoney high quality surface rotary device. Includes the hold-down clamp for open faced glassware.
  • Fits most Chinese Laser Machines with Lasercut software. Fits Weike, Hurricane Lasers, Boss Laser, Morntech, Beyond Laser, Glory Laser, Golden Laser, and many more. Fast setup and take-down. Accurate work, every time.
  • Surface driven, so no need to change software settings for every part diameter.
  • Includes wire and complete instructions.



Swivel Knife Accessory - For Chinese Laser Machinery Owners by Mahoney $279

Swivel Knfie Add On Tool for Chinese Laser Machines

  • Add a Swivel Knife to your laser machine to add capability. Perform vinyl cutting and KISS cutting using your knife. Adjust blade depth as necessary. Uses disposable sign blades that can be purchased at a variety of angles (standard sign blades)
  • Fits any Chinese Laser Machine. Fits Weike, Hurricane Lasers, Boss Laser, Morntech, Beyond Laser, Glory Laser, Golden Laser, and many more.
  • New capability, new functionality. Get more out of your machine! Pen holder that holds most standard office and ball point pens. Marker holder marker holder holds sharpies, markers, pressurized space pens, and etching tools;
  • Installation: First, add the bolt-on connection to your laser head bracket. Then, run the wire back through the e-chain to the power supply (included), using the instructions provided. Tools not included.





Bell Laser provides spare parts, consumables, technical support, and upgrades on any laser manufacturer's CO2 laser machine.

  • RF CO2 Laser Upgrades starting at $2820

    Retrofit upgrades for RF CO2 Lasers, replacing glass tube lasers.

    Synrad RF Laser Model T100 with High Beam Quality Mode

  • Beam Delivery Upgrades starting at $165

  • CW-5000 Chiller Upgrade $650

    An undersized chiller will cause overheating and power loss in the laser machine. Upgrade to the CW-5000 for consistent power within a tight band of temperature control, including both heating and chilling.


    CW-5000 Chiller, and all 5000 series models, capacity to 200 watts

  • Combination Tables. Prices vary.

    Combintation Tables provide three choices to provide support for your materials while laser engraving or cutter.  Our combination tables provide honeycomb, metal slat, and vacuum.  Easy to change and switch, and light weight, it helps laser machinery operators to produce better results.  Vacuum tables hold films and thin materials firm and flat while laser cutting or engraving. Metal slats can be positioned so no back reflection occurs while laser cutting acrylics and other materials. Honeycomb provides an excellent support for flexible materials and an evacuation method that prevents laser cut vapors from redepositing on the underside of the material, thus increasing quality.

    Vacuum Hold Down for Laser Cutting and Engraving Machines

  • Filtration Devices

    Bell Laser offers the Bell 100 Filtration Devices for your laser machinery.  Filtration sizing available based upon your machine size, laser power, and materials processed.   See photos on the right for filtration devices.

  • Laser Recharge Services

    Contact Bell Laser for recharging your laser tube.  We can get your laser back to full power using our refill service.

    Lasers Serviced for gas refills include:

    Coherent Diamond G-SeriesG50,G100, G150

    Diamond C-SeriesC-20A, C-30A, C-40A, C70A

    Coherent/Deos/GEM Series30A, 40A, 50A, 60A, 70A

    GEM100A/LDEOS 25, DEOS 30, DEOS 40, DEOS 60, DEOS 100

    Diamond K-SeriesK150, K225, K250, K300, K500

    Coherent D-SeriesD-64, D-84

    Epilog Brand Lasers30, 40, 50, 60, 75, 120


    Beam Dynamics LMC-5000 Exciter and Tube

    Call us today for great pricing and service.

  • 100 watt Mahoney Laser Power Meter Probes $95

    This product is great for owners of laser engraving machines, laser engraving systems, laser cutting machines, laser cutting systems.  Also for owners of CO2 glass tube lasers, CO2 and YAG laser markers, laser marking machines, fiber laser marking machines.  It even works with RF lasers manufactured by Synrad, Coherent, Rofin, Universal Laser, Epilog Laser, Universal Laser Systems, Gravograph, Pinnacle, RECI, EFR, Jilin Yong Li, Mactron Technology, North Star Electron, Shanghai Jinke Intelligent Technology, YL Lasers, Prima, Trumpf, PRC laser. It works with laser machines made by Rabbit Laser, GW Weike, Yueming, Hans Laser, Beijing New Power, Chutian, Foshan Beyond, Grand Bird, Jinan XYZ, Perfect laser, Suke, and many many more.  Get your quick laser power output reading today and exercise your warranty as needed. Ensure the best quality for the laser cutting and engraving now.  Do not miss this opportunity for our introductory pricing. 

    Buy Now - 100 watt Mahoney Laser Power Meter Probe, with this link.
    

    Specifications

    Accurately and quickly measure laser laser engraver/laser cutter power. 200&500 watt available. Individually Calibrated.

    100 Watt CO2 Laser Power Measurement Probe.  Comes with instructions and original packaging.

    Measures laser power for YAG (900-1250 nm) and CO2 (8-11 microns).  Laser measurement range from 0 to 100 watts.  This probe is tested and fully operational.

    Laser power measurements are quick and easy with the 100 watt power probe.  Position the power meter in front of the laser beam (as shown in the photo) and 28 seconds later read the power measurement.  It does not involve a time consuming setup and alignment like other power meters.  Unfortunately, most laser power meters have sacrificed ease of use to gain continuous power readings.  However, in most laboratory and production situations, the usual requirement is for a quick spot-check of power with a minimum of disruption.  

    This power probe is a calorimeter type power meter which measures laser power using a timed exposure.  It will display the average power absorbed on the calibrated readout scale and can be used with continuous or repetitively pulsed lasers.

    Key Features of this probe are:

    • The absorbing probe head is conveniently sized. The head is large enough to be easily used, yet small enough to be inserted between optical components to measure the laser power without disturbing set-up.
    • The hand-held meter requires only about one minute to make a laser power measurement
    • The absorbent coating is very tough, resisting mechanical abrasion and water immersion
    • A zero adjustment mechanism has been incorporated into the design to expedite and simplify the power measurement process
    • An accurate and durable all metal construction has been used to ensure a long life


    Taking Measurements

    The Mahoney 100 watt power probe is a self-contained unit consisting of an absorbing head, a temperature measuring mechanism, a zeroing screw/nut and a readout dial.  In operation, the dial is zeroed.  Then, the absorbing head on the end of the power probe is exposed to the laser beam for 28 seconds.

    After the laser probe is removed from the laser beam, the average power can be read out on the dial.  If it is necessary to make several power measurements in succession, the absorbing head can be rapidly cooled by immersing into a bucket of water between measurements.

    The 100 watt laser probe has a coating that works for the wavelength range of 0.2 to 11 microns.


    Laser Power Meter Probes starting at 100 watts. Models 200, 500 watt available.

Technical Support and Spare Parts

Bell Laser  provides technical support and spare parts for most manufacturers machinery.

We provide parts for problems including:

  • Axis motor skipping or moving too far
  • Replacement honeycomb
  • Laser Machines that cut/engrave at different depths over the table area
  • Laser tubes that do not engrave or cut as previously
  • Chillers that alarm
  • Chillers that do not provide enough chilling power
  • Photographs that do not engrave with clarity
  • Lasers that do not fire


Rotary (Surface Type) Accessory - Fits Epilog Laser Engravers/Cutters by Mahoney. 

Mahoney rotary fits many models Epilog Lasers

  • Add rotary laser processing capability to your Epilog laser engraver with the Mahoney high quality surface rotary device. Includes the hold-down clamp for open faced glassware.
  • Fits most models of Epilog Lasers, including Epilog Helix, Epilog Mini, Epilog Legend EXT, Epilog Radius, Epilog Summit and more. Does not fit Epilog Zing and not Epilog Fusion.
  • Surface driven, so no need to change software settings for every part diameter.
  • Includes wire and complete instructions.

Buy Now - Epilog style rotary by Mahoney with this link.


New LCD for Epilog Laser machines by Mahoney. 



Epilog Legend LCD display replacement product



  • New LCD screen display for Epilog Lasers. Direct replacement.
  • Easy to install new LCD for Epilog Laser display. Use a screw driver and be done in a few minutes.
  • Saves money because you only purchase the part you need, not a whole control panel.
  • Comes with ribbon cable.
  • Solves problems including white screen LCD
  • Solves problem of a dim LCD
  • Solves problem of a fading LCD
  • Solves problem of lines on screen LCD
  • Solves problem of lines through text
  • Solves problem of no text showing LCD
  • Solves problem of backlighting LCD with no text
  • Solves problem of blocks on LCD
  • Solves problem of LCD suddenly going blank
  • Solves problem of a few lines not working
  • Solves problem of LCD won't display anything
  • Reliable new "old stock" for a fraction of the price offered by machinery makers. Available while supplies last (six at the time of writing this description).

Buy Now - replacement LCD for Epilog machines, using this link.

Bell_Laser_Laser_Processing_Machinery     Bell Laser LLC

Laser Processing Machines and Services to Harvest Profits  

Our demonstration of technical Know-How will help you separate the wheat from the chaff  to make your best decision on a laser machine purchase.

113 Cherry Street
Seattle , WA 98104

ph: 800-385-6760

Upgrades, Parts, Consumables

Share by: