More Information

For new machinery, tell us the laser power that you need, or the metals and thicknesses needed to cut.

For installation or upgrade to your laser machine, provide details of the current machine including laser maker and model, current laser output power, and chiller make and model.  Then, tell us the laser power you would consider.

Common Questions

Q: Will this laser cut quarter inch carbon steel?

A: Yes, the 400 watt will cut quarter inch mild steel and carbon steel.

Q: Will this laser cut 2 mm stainless steel?

A: The 500 watt model will cut 2 mm 316 stainless steel.

Contact Us

Thank you for contacting us.
We will get back to you as soon as possible
Oops, there was an error sending your message.
Please try again later

The all new glass tube 200, 300, 400, and 500 watt lasers are available now. Do not miss this opportunity for low cost thin metals cutting.

Do you remember when the glass tube lasers first became popular?  The USA manufacturers said that they were no good--and now--by quantity, they dominate the market.

Be a part of the renaissance.  Purchase for your metal cutting capability now.  Provide your information on the form below.

Video:   http://www.youtube.com/watch?v=6mhE5oUUnFw&feature=youtu.be

CO2 Sheet Metal Cutting Laser Machine 200 watts

CO2 Laser Capacitance HeadVariety of shapes cut with a CO2 laser equipped with a Capacitance HeadVideo:  https://www.youtube.com/watch?v=6mhE5oUUnFw&feature=youtu.be

Above: Capacitance Head floats above the metal, while maintaining focus for a perfect cut every time.

Start with one machine now, and add more as buyer demand increases.

Partial Financing is offered on products and services including laser upgrades packages, laser refills/refurbishment, and laser machinery. Inquire today.

  4'x8' 200 Watt CO2 Laser:  call for pricing

  4'x8' 300 Watt CO2 Laser:  call for pricing

  New glass tube 4'x8' 400 Watt CO2 Laser:  $35,200

  Refurbished Synrad F400, 400 watt CO2 laser on 4' x 8' table: $49,000

  4'x8' 500 Watt CO2 Laser:  call for pricing

One year warranty on all laser sources. If, after one year, you do not have the power rating as listed above, a replacement laser source will be provided and your old laser returned to our US facility. A complimentary 500 watt Mahoney power probe is supplied with each machine sold in December.

48 inch wide by 96 inch deep CO2 laser cutting metal

Get a Quote

Provide your information below

Bell_Laser_Laser_Processing_Machinery     Bell Laser LLC

Laser Processing Machines and Services to Harvest Profits  

Our demonstration of technical Know-How will help you separate the wheat from the chaff  to make your best decision on a laser machine purchase.

113 Cherry Street
Seattle , WA 98104

ph: 800-385-6760

ALL NEW 200, 300, 400, 500 watt CO2 lasers available NOW!

Share by: